Vignette, thank you for any feedback!

Mechanical & Electrical Plan Vignette and Multiple Choice

Vignette, thank you for any feedback!

Postby graphics » Wed Oct 10, 2012 8:57 pm

Testing next week, any comments will help. Are the lights too close to the walls (1'-2" in conference room), or too far from the walls in other spaces?

Thank you!
You do not have the required permissions to view the files attached to this post.
graphics
 
Posts: 6
Joined: Wed Oct 10, 2012 8:52 pm

Re: Vignette, thank you for any feedback!

Postby Coach » Wed Oct 10, 2012 10:21 pm

2x4 spacing incorrect.
Place dampers in wall.
Closet flex appears to be missing.
Some air distribution is weak.
User avatar
Coach
Site Admin
 
Posts: 13249
Joined: Wed May 23, 2012 2:08 am

Re: Vignette, thank you for any feedback!

Postby graphics » Thu Oct 11, 2012 7:00 pm

Thank you for your comments. I do realize that I was a bit confused about the light spacing. Even though the lighting diagrams indicate that the 2x4 fixtures can be 6' apart from the adjacent fixture in the 2' direction, the ncarb passing solution in AO office show them 4' apart in both direction. I guess it still makes sense to follow the light diagrams to get more even light throughout.
Can you also please clarify what you meant when you said the air distribution is weak?
Thank you!
graphics
 
Posts: 6
Joined: Wed Oct 10, 2012 8:52 pm

Re: Vignette, thank you for any feedback!

Postby Coach » Thu Oct 11, 2012 8:47 pm

graphics wrote: the ncarb passing solution in AO office show them 4' apart in both direction.

ncarb solution is incorrect.

Can you also please clarify what you meant when you said the air distribution is weak?

S/R placement could be better.
User avatar
Coach
Site Admin
 
Posts: 13249
Joined: Wed May 23, 2012 2:08 am

Re: Vignette, thank you for any feedback!

Postby graphics » Fri Oct 12, 2012 8:37 pm

Thank you!
graphics
 
Posts: 6
Joined: Wed Oct 10, 2012 8:52 pm

Re: Vignette, thank you for any feedback!

Postby graphics » Sat Oct 13, 2012 8:14 pm

This is my next attempt. Hopefully I resolved most of the problems. Any feedback will be great. Thank you!
You do not have the required permissions to view the files attached to this post.
graphics
 
Posts: 6
Joined: Wed Oct 10, 2012 8:52 pm

Re: Vignette, thank you for any feedback!

Postby Coach » Sat Oct 13, 2012 8:57 pm

Place dampers in wall.
Looks good otherwise.
User avatar
Coach
Site Admin
 
Posts: 13249
Joined: Wed May 23, 2012 2:08 am

Re: Vignette, thank you for any feedback!

Postby graphics » Sat Oct 13, 2012 9:01 pm

Thank you for the quick response! Will move the dampers inside the thickness of the wall.
graphics
 
Posts: 6
Joined: Wed Oct 10, 2012 8:52 pm

Re: Vignette, thank you for any feedback!

Postby tlford01 » Thu Nov 15, 2012 7:20 pm

Can anyone comment on the 2nd attachemt "slivers" in the supply and conference room? Would they be acceptable for the test? Thanks.
tlford01
 
Posts: 12
Joined: Thu Nov 15, 2012 6:56 pm


Return to BS - BUILDING SYSTEMS

Who is online

Users browsing this forum: No registered users and 39 guests

cron