Page 1 of 1

Vignette - 3rd attempt

PostPosted: Wed Feb 14, 2018 1:24 pm
by hhallancia
3rd attempt BS.pdf
Hi,
I am wondering if the rigid duct can be placed over the lighting fixture the way I have in the conf. room.
Also, about the accent lighting - im guessing when the overlap of the sketch circles touch the edge of wall, this is satisfactory to light up the wall?
Do I need another accent fixture? It seem that if I add another I may over do it. This is why im keeping it conservative.

Thank you

Re: Vignette - 3rd attempt

PostPosted: Wed Feb 14, 2018 3:11 pm
by Sparky83
hhallancia wrote:
3rd attempt BS.pdf
Hi,
I am wondering if the rigid duct can be placed over the lighting fixture the way I have in the conf. room. Why not?
Also, about the accent lighting - im guessing when the overlap of the sketch circles touch the edge of wall, this is satisfactory to light up the wall? Sketch circles should intersect each other at the face of the wall as shown.
Do I need another accent fixture? It seem that if I add another I may over do it. This is why im keeping it conservative. Adding one requires changing the distance between the lights and between lights and wall.

Thank you

Uneven HVAC layout in the studio. Also poor separation between supply & return. Min 4' is recommended.