4.0 Vignette First Attempt

Mechanical & Electrical Plan Vignette and Multiple Choice

4.0 Vignette First Attempt

Postby bleabru » Sun Feb 04, 2018 11:47 am

First attempt. Comments appreciated.
Any handy tricks for knowing which direction is best for laying out the ceiling grid?
Thanks in advance.
You do not have the required permissions to view the files attached to this post.
bleabru
 
Posts: 8
Joined: Sun Mar 15, 2015 5:15 pm

Re: 4.0 Vignette First Attempt

Postby megara22 » Sun Feb 04, 2018 12:54 pm

I think your lights are too close to the wall in a few rooms. Try for at least 1' from the wall. Also, I would move your rigid supply line over towards the exterior side wall (when it first exists the riser) so it does not sit adjacent to your diffuser in the Supply Room. This happens again in the dratfing studio. Also, If you move your accent lights east a bit (so that your circles are just touching the wall) you can space them out a bit better so one isn't falling so close to the grid.
megara22
 
Posts: 6
Joined: Tue Nov 15, 2016 10:49 am

Re: 4.0 Vignette First Attempt

Postby twcox » Sun Feb 04, 2018 1:38 pm

Are the accent lights too close together here? It looks like they're only spread out 2' on center. Shouldn't they be 4' OC since the light spread at 4' below the ceiling and 2' on either side is 80FC?
twcox
 
Posts: 2
Joined: Wed Jan 18, 2017 11:32 am

Re: 4.0 Vignette First Attempt

Postby Sparky83 » Sun Feb 04, 2018 2:58 pm

twcox wrote:Are the accent lights too close together here? It looks like they're only spread out 2' on center. Shouldn't they be 4' OC since the light spread at 4' below the ceiling and 2' on either side is 80FC?

It doesn't work that way. You are lighting a wall at a specific elevation.
Sparky83
 
Posts: 7649
Joined: Tue Dec 02, 2014 1:36 pm

Re: 4.0 Vignette First Attempt

Postby Sparky83 » Sun Feb 04, 2018 2:59 pm

Reception and supply closet are over lit.
Uneven lighting in the conference room.
Rotate 2x4 lights in the architect's office for more uniform coverage.
No air movement in the middle of the conference room.
Sparky83
 
Posts: 7649
Joined: Tue Dec 02, 2014 1:36 pm


Return to BS - BUILDING SYSTEMS

Who is online

Users browsing this forum: No registered users and 45 guests

cron