by Sparky83 » Sat Nov 25, 2017 2:43 pm
Return grilles in reception and supply closet will fall out. They should be properly supported by the grid.
Poor separation between supply & return in the supply closet and conference room. Min 4' is recommended.
Rotate 2x4 lights in the architect's office for more uniform coverage.
Inadequate accent lighting. Too far apart and too far from the wall.
Illegal rigid duct location. East/west is not within 2' of a bearing wall or beam. Fatal.
DO NOT bend the rigid duct inside the riser shaft. That is difficult to construct and accomplishes nothing.