BS - Vignette First Attempt - Please Review!

Mechanical & Electrical Plan Vignette and Multiple Choice

BS - Vignette First Attempt - Please Review!

Postby bradfordpayne » Thu Oct 12, 2017 5:08 pm

First attempt at the vignette:
1. Can the rigid duct cross over a light fixture?
2. Some of the lights are centered in the room, but more than 4' from the wall, is this acceptable?
3. What is a good rule of thumb in diffuser placement, should they be in a different tile than the light, or can it be in the same? Similar question to the return?
You do not have the required permissions to view the files attached to this post.
bradfordpayne
 
Posts: 49
Joined: Sun Mar 15, 2015 3:11 pm

Re: BS - Vignette First Attempt - Please Review!

Postby Sparky83 » Thu Oct 12, 2017 6:05 pm

bradfordpayne wrote:First attempt at the vignette:
1. Can the rigid duct cross over a light fixture? Yes
2. Some of the lights are centered in the room, but more than 4' from the wall, is this acceptable? It will never be perfect.
3. What is a good rule of thumb in diffuser placement, should they be in a different tile than the light, or can it be in the same? Similar question to the return? Doesn't matter as long as they won't fall out.

Incorrect spacing for all 2x4 lights.
Accent lights are too far from the wall. Sketch circles should intersect each other at the face of the wall.
Poor air movement on the west side of the architect's office.
Sparky83
 
Posts: 7649
Joined: Tue Dec 02, 2014 1:36 pm

Re: BS - Vignette First Attempt - Please Review!

Postby bradfordpayne » Sat Oct 14, 2017 1:57 pm

Thank you, I will give it another shot!

What is the size of the circle for the accent lights? Just want to double check.
bradfordpayne
 
Posts: 49
Joined: Sun Mar 15, 2015 3:11 pm

Re: BS - Vignette First Attempt - Please Review!

Postby raaz227 » Sat Oct 14, 2017 6:28 pm

Sparky83 wrote:
bradfordpayne wrote:First attempt at the vignette:
1. Can the rigid duct cross over a light fixture? Yes
2. Some of the lights are centered in the room, but more than 4' from the wall, is this acceptable? It will never be perfect.
3. What is a good rule of thumb in diffuser placement, should they be in a different tile than the light, or can it be in the same? Similar question to the return? Doesn't matter as long as they won't fall out.

Incorrect spacing for all 2x4 lights.
Accent lights are too far from the wall. Sketch circles should intersect each other at the face of the wall.
Poor air movement on the west side of the architect's office.


Sparky, if there is poor air movement on the west side of the architects office wouldn’t that also apply to the drafting studio? Is it because the AO office supply and return are offset?
raaz227
 
Posts: 76
Joined: Thu Dec 05, 2013 2:44 pm

Re: BS - Vignette First Attempt - Please Review!

Postby Sparky83 » Sun Oct 15, 2017 5:22 am

raaz227 wrote:
Sparky83 wrote:
bradfordpayne wrote:First attempt at the vignette:
1. Can the rigid duct cross over a light fixture? Yes
2. Some of the lights are centered in the room, but more than 4' from the wall, is this acceptable? It will never be perfect.
3. What is a good rule of thumb in diffuser placement, should they be in a different tile than the light, or can it be in the same? Similar question to the return? Doesn't matter as long as they won't fall out.

Incorrect spacing for all 2x4 lights.
Accent lights are too far from the wall. Sketch circles should intersect each other at the face of the wall.
Poor air movement on the west side of the architect's office.


Sparky, if there is poor air movement on the west side of the architects office wouldn’t that also apply to the drafting studio? Is it because the AO office supply and return are offset?

No. Supply on one side and return on the other is not the issue. In the architect's office neither is close enough to the west side of the room.
Sparky83
 
Posts: 7649
Joined: Tue Dec 02, 2014 1:36 pm


Return to BS - BUILDING SYSTEMS

Who is online

Users browsing this forum: No registered users and 36 guests

cron