BS Vignette Solution, First Try

[pharjun1]

Hello all,
Please find attached, my first attempt at this vignette.
I was confused about the spacing of the accent lighting. The Program said to have the lighting be at 80ft/candles at the wall, which created a 1ft radius. I double checked, but that didn't seem to be correct. Perhaps I'm misreading the diagram. Please let me know if you find errors in my solution! Thank you!

[Coach]

I was confused about the spacing of the accent lighting. The Program said to have the lighting be at 80ft/candles at the wall, which created a 1ft radius. I double checked, but that didn't seem to be correct.

1' is not correct.

2x4 spacing incorrect.
Lights not centered in most rooms.
Maintain 4' min between S & R grilles.
Missing flex.
Rigid layout does not allow for flexibility.

[pharjun1]

Thank you,
I was misreading the accent light instructions. It's 5ft above the finish floor, which = 4ft from ceiling.
With the 3ft from the side of the 2x4, that means my space is overlit?
Would keeping the rigid to the perimeter give more flexibility?
-Thanks

[Coach]

With the 3ft from the side of the 2x4, that means my space is overlit?

Yes. Spacing is dictated by diagram.

Would keeping the rigid to the perimeter give more flexibility?

Quite the opposite.