Custom ALT

Structural Layout Vignette and Multiple Choice

Custom ALT

Postby kotharin78 » Wed Dec 13, 2017 6:16 am

This is my first attempt at the "Custom ALT" I test on 12/18

please comment if mistakes are noticed.
You do not have the required permissions to view the files attached to this post.
kotharin78
 
Posts: 54
Joined: Sat Oct 08, 2016 10:10 pm

Re: Custom ALT

Postby kotharin78 » Wed Dec 13, 2017 6:17 am

Here is the program:

Program for C2TUT2W1-Structure-Custom Alternate 12/07
SITE/FOUNDATION
1. The site has no seismic activity and wind pressures are negligible.
2. The soils and foundation system should be assumed adequate for all
standard and normal loads.
3. The distribution of concentrated or special loads need not be considered.
CONSTRUCTION/MATERIALS
1. Structural steel/open web steel joist construction has been chosen for the roof
structure type.
2. Steel beam sections are to be rolled or built-up.
3. Excluding the Reception area, the metal roof deck is capable of carrying
design loads on spans up to and including 3’-6”. The metal roof deck over the
Reception is capable of carrying design loads on spans up to and including
5’-0”.
4. Joists are sized to carry roof loads only.
5. Beams can span a maximum of 35’.
GENERAL REQUIREMENTS
1. All portions of the roof framing are flat.
2. Cantilevers are prohibited.
3. Structural members must not extend beyond the building envelope, except to
frame the designated porch.
4. Columns may be located within walls, including the clerestory window wall.
Columns may not be located in window walls.
5. Walls shown on the background floor plan may be designated as bearing
walls. Additional bearing walls are not allowed.
6. Lintels are required to be shown in bearing walls only. Other lintels shall not
be indicated.
7. The openings located between the Cafeteria’s and the Reception must be
unobstructed and column-free.
8. The Cafeteria’s must be column-free.
9. The window walls and the clerestory windows extend to the underside of the
structure above. All other openings have a head height of 7 ft above finish
floor.
10. The roof over the high ceiling spaces must be higher than the roof over the
low ceiling spaces.
• The Cafeteria’s requires a high ceiling with top of structure height of 20 ft.
• The Reception requires a high ceiling with top of structure height of 30 ft
• The remaining spaces require a low ceiling with a top of structure height of
12 ft.
11. The structure must accommodate (2) clerestory windows. One shall be
located along the full length of the West wall of the Western Cafeteria. One
shall be located along the full length of the East wall of the Eastern Cafeteria.
kotharin78
 
Posts: 54
Joined: Sat Oct 08, 2016 10:10 pm


Return to SS - STRUCTURAL SYSTEMS

Who is online

Users browsing this forum: No registered users and 1 guest

cron