Interior Layout Check_testing Wednesday

Interior Layout & Building Layout Vignettes

Interior Layout Check_testing Wednesday

Postby stubscook » Sat Apr 14, 2018 6:45 pm

Please let me know if you have any thoughts, suggestions, or spot any errors.
Thank you!
You do not have the required permissions to view the files attached to this post.
stubscook
 
Posts: 36
Joined: Fri Apr 01, 2016 9:22 pm

Re: Interior Layout Check_testing Wednesday

Postby teelee » Sat Apr 14, 2018 9:57 pm

I think it's considered a minor penalty if your turn around circle overlaps your door swing.
teelee
 
Posts: 75
Joined: Thu Dec 04, 2014 1:18 pm

Re: Interior Layout Check_testing Wednesday

Postby stubscook » Mon Apr 16, 2018 12:03 pm

It shouldn't be. By code you can overlap the turning radius with door swings.
See ADA 304.4.
stubscook
 
Posts: 36
Joined: Fri Apr 01, 2016 9:22 pm

Re: Interior Layout Check_testing Wednesday

Postby Sparky83 » Mon Apr 16, 2018 12:44 pm

stubscook wrote:It shouldn't be. By code you can overlap the turning radius with door swings.
See ADA 304.4.

The ADA does not apply to the NCARB code, but you are correct, AND there is nothing in the code or program to prevent the overlap.
Sparky83
 
Posts: 7649
Joined: Tue Dec 02, 2014 1:36 pm

Re: Interior Layout Check_testing Wednesday

Postby stubscook » Tue Apr 17, 2018 8:00 pm

That makes zero sense to me. I strongly dislike NCARB.
Thanks Sparky.
stubscook
 
Posts: 36
Joined: Fri Apr 01, 2016 9:22 pm


Return to SD - SCHEMATIC DESIGN

Who is online

Users browsing this forum: No registered users and 45 guests

cron