IL Attempt 1

Interior Layout & Building Layout Vignettes

IL Attempt 1

Postby lesliediane » Sun Jan 21, 2018 1:06 pm

This is my first attempt. It was more difficult than it seemed--took me 1 hour and 15 minutes. Any advice is appreciated.
You do not have the required permissions to view the files attached to this post.
lesliediane
 
Posts: 77
Joined: Fri Oct 18, 2013 2:56 pm

Re: IL Attempt 1

Postby lesliediane » Sun Jan 21, 2018 1:13 pm

After looking at some of the other posts, I noticed my T44 is not accessible--the southeast chair is not and the western chairs don't have clearance between them and the arm chairs. Perhaps I should have rotated it.

Any advice on the best ways to place the T44? It seems to require a ton of room. Thanks.
lesliediane
 
Posts: 77
Joined: Fri Oct 18, 2013 2:56 pm

Re: IL Attempt 1

Postby lesliediane » Sun Jan 21, 2018 1:24 pm

Would this T44 be acceptable?

Also, I realize my RBO furniture layout doesn't make all that much sense, with the coffee table over by the work table. Does this matter? It's my understanding it's not about design but about meeting the code and putting the right furniture in the right room, correct?

Furniture can be right up against the wall and right next to each other, right, but doors should be one click away?

The front of the executive desk needs 18" across, right?

Thanks again.
You do not have the required permissions to view the files attached to this post.
lesliediane
 
Posts: 77
Joined: Fri Oct 18, 2013 2:56 pm


Return to SD - SCHEMATIC DESIGN

Who is online

Users browsing this forum: No registered users and 54 guests

cron