Interior Layout Vignette Alts # 2, 4, 5

Interior Layout & Building Layout Vignettes

Interior Layout Vignette Alts # 2, 4, 5

Postby jackstatic » Thu Nov 16, 2017 8:28 pm

Ok I finally finished the remaining Interior Layout Alternate Vignettes, these all ran MUCH smoother than #3.
1 thing I learned from #2 was that, if given the option, use smaller pieces of furniture. I tried to play tough guy and use 20 lateral files and I am pretty sure that is a red herring to throw you off, because I could not make it fit. 2 verticals slid in last minute no problem... Its a bit messy but it works I think, anyway any feedback would be great, if they look good that too is great.
IL ALT 2#1.JPG
IL ALT 4#1.JPG
IL ALT 5#1.JPG


On a side note, rant, and personal thought for the drafting program, and I've noticed this before, specifically on the Site Plan design with parking stalls, why does the program draw things bigger than it really is when zoomed out?
The attached example is tough to tell but I drew (2) 3'-0" circles (1'-6" Radius) and they are not the same size, with the parking stalls for example, I used 9'-0" separation but when actually measured each stall came out to, 9'-3" as an example?
All my radius circles are drawn based on measurements of sketched out squares while I am zoomed in, simply because it really adds up over time if circles are slightly bigger than the actual size!
sample confusion.JPG


Anyway my test is the saturday after Thanksgiving, like 8 days away, so this weekend will be spent focusing on Building Layout, and black friday and thanksgiving will be spent drafting for time!
You do not have the required permissions to view the files attached to this post.
jackstatic
 
Posts: 111
Joined: Thu Sep 03, 2015 7:57 am

Re: Interior Layout Vignette Alts # 2, 4, 5

Postby sbyrktct » Fri Nov 17, 2017 7:58 am

All three solutions look good.

jackstatic wrote:I tried to play tough guy and use 20 lateral files and I am pretty sure that is a red herring to throw you off, because I could not make it fit.


In all the years of reviewing vignettes (areforum & arecoach), I've only seen two posted solutions work with 20 lat files.

jackstatic wrote:On a side note, rant, and personal thought for the drafting program, and I've noticed this before, specifically on the Site Plan design with parking stalls, why does the program draw things bigger than it really is when zoomed out?
The attached example is tough to tell but I drew (2) 3'-0" circles (1'-6" Radius) and they are not the same size, with the parking stalls for example, I used 9'-0" separation but when actually measured each stall came out to, 9'-3" as an example?


Welcome to NCARBland... where the codes are different and reality doesn't matter!
User avatar
sbyrktct
 
Posts: 1891
Joined: Thu May 24, 2012 9:35 am
Location: http://arehelp.webs.com/

Re: Interior Layout Vignette Alts # 2, 4, 5

Postby Archie7 » Mon Nov 27, 2017 8:00 pm

where did you find alternate layouts ? Can you still use them with NCARBS html program? Thanks Dave
Archie7
 
Posts: 7
Joined: Mon Sep 29, 2014 4:57 pm

Re: Interior Layout Vignette Alts # 2, 4, 5

Postby sbyrktct » Tue Nov 28, 2017 6:59 am

Archie7 wrote:where did you find alternate layouts ?


Here: http://arehelp.webs.com/sd

Archie7 wrote:Can you still use them with NCARBS html program?


Nope. Alts only work with the downloaded program.
Download from here: https://www.ncarb.org/pass-are/are4/pre ... tic-design

Archie7 wrote:Thanks Dave


No problem, Dave.
User avatar
sbyrktct
 
Posts: 1891
Joined: Thu May 24, 2012 9:35 am
Location: http://arehelp.webs.com/


Return to SD - SCHEMATIC DESIGN

Who is online

Users browsing this forum: No registered users and 43 guests

cron