interior layout III

Interior Layout & Building Layout Vignettes

interior layout III

Postby VinBar » Wed Oct 16, 2013 8:46 pm

this one was a dousey..I think the plan was a little too tight.

Are the alts generally tougher than the exam? There seem to be a lot of little pieces to fit in and a bit tricky. This was actually my second attempt at this layout.

questions:
1) door into SO from reception - it swings into the middle of the room. its clear from all sides so i think it works?
You do not have the required permissions to view the files attached to this post.
VinBar
 
Posts: 83
Joined: Mon Oct 07, 2013 5:24 pm

Re: interior layout III

Postby zahzou » Thu Oct 17, 2013 11:12 am

Not familiar with this particular program, but for starters, it looks like your push/pull clearances may be inadequate at some doors? They look awfully narrow at some...
User avatar
zahzou
 
Posts: 123
Joined: Mon Sep 16, 2013 1:07 pm

Re: interior layout III

Postby VinBar » Thu Oct 17, 2013 1:21 pm

thanks.
i spotted 1 between the lcr and the work room. this was a real tight fit.
VinBar
 
Posts: 83
Joined: Mon Oct 07, 2013 5:24 pm

Re: interior layout III

Postby zahzou » Thu Oct 17, 2013 1:26 pm

Several others have the problem as well... keep a close eye...
User avatar
zahzou
 
Posts: 123
Joined: Mon Sep 16, 2013 1:07 pm


Return to SD - SCHEMATIC DESIGN

Who is online

Users browsing this forum: No registered users and 84 guests

cron