Interior Layout - Alt 1

Interior Layout & Building Layout Vignettes

Interior Layout - Alt 1

Postby eeiliesc » Thu Sep 14, 2017 8:39 pm

IL Alt1_Att1 17-0914.jpg
My first attempt at the interior layout alt. 1 file - thanks in advance for reviewing and your comments!
You do not have the required permissions to view the files attached to this post.
eeiliesc
 
Posts: 35
Joined: Mon Dec 07, 2015 10:44 pm

Re: Interior Layout - Alt 1

Postby sbyrktct » Thu Sep 14, 2017 9:09 pm

- CR wall corner blocks clear view of entry door
- copier & bookcase block worktable in CR
- NCARB has stated that 60" turning circles should not overlap door swings
- verify 60" turning circle in LCR
- middle two chairs on east side of conf table are inaccessible
User avatar
sbyrktct
 
Posts: 1891
Joined: Thu May 24, 2012 9:35 am
Location: http://arehelp.webs.com/

Re: Interior Layout - Alt 1

Postby eeiliesc » Mon Sep 18, 2017 9:17 pm

Thanks for your feedback! Tried to adjust the old layout but felt hopeless so attempted again.

I know square tables can be shoved in corners, does the same apply to round ones?
You do not have the required permissions to view the files attached to this post.
eeiliesc
 
Posts: 35
Joined: Mon Dec 07, 2015 10:44 pm

Re: Interior Layout - Alt 1

Postby sbyrktct » Tue Sep 19, 2017 6:30 am

- stor cab & copier block work table in CR
- vert file in SO is tucked in behind desk... don't let it become inaccessible

eeiliesc wrote: I know square tables can be shoved in corners, does the same apply to round ones?


Yes.
User avatar
sbyrktct
 
Posts: 1891
Joined: Thu May 24, 2012 9:35 am
Location: http://arehelp.webs.com/

Re: Interior Layout - Alt 1

Postby eeiliesc » Tue Sep 19, 2017 9:18 pm

Thanks for your feedback!

I thoroughly read your notes on your site and realized I was giving WAY too much room to the T44. I think this one might be better...?

IL Alt1_Att3 17-0919.jpg


How much clearance does the work table need...just the long side, correct?


Thanks again!
You do not have the required permissions to view the files attached to this post.
eeiliesc
 
Posts: 35
Joined: Mon Dec 07, 2015 10:44 pm

Re: Interior Layout - Alt 1

Postby sbyrktct » Wed Sep 20, 2017 11:01 am

- missing RBO tag
- doors are best situated one click away from the wall they lay back on

eeiliesc wrote:I thoroughly read your notes on your site and realized I was giving WAY too much room to the T44. I think this one might be better...?

With this rotated config, you can get closer to north wall still.
Though, I do recommend only rotating the T44 45 degrees if you are in a pinch...

eeiliesc wrote:How much clearance does the work table need...just the long side, correct?

36" clear on one long side, yes.
User avatar
sbyrktct
 
Posts: 1891
Joined: Thu May 24, 2012 9:35 am
Location: http://arehelp.webs.com/


Return to SD - SCHEMATIC DESIGN

Who is online

Users browsing this forum: JasonRop and 46 guests

cron