Ramp Vignette - 1st Attempt

Ramp, Stair, & Roof Vignettes and Multiple Choice

Ramp Vignette - 1st Attempt

Postby hhallancia » Sun Apr 15, 2018 3:37 pm

Ramp Vignette 1st attempt-.pdf
Please comment on errors or improvements I could make.
Thank you!
You do not have the required permissions to view the files attached to this post.
hhallancia
 
Posts: 35
Joined: Tue Jan 12, 2016 9:41 am

Re: Ramp Vignette - 1st Attempt

Postby Coach » Sun Apr 15, 2018 4:31 pm

Egress narrows at base of stair.
Hold rails 2" off walls and edges.
Move door north. No reason to crowd pull side.
User avatar
Coach
Site Admin
 
Posts: 13249
Joined: Wed May 23, 2012 2:08 am

Re: Ramp Vignette - 1st Attempt

Postby hhallancia » Tue Apr 17, 2018 4:16 am

Coach wrote:Egress narrows at base of stair. [color=#00BF40]i used 6" risers to meet code. I also successfully placed a 60" turning radius at the base of the stair. space between wall and protruding railing at bottom of stair = 52". are you suggesting I bend the railing 90 degrees at the base?
Hold rails 2" off walls and edges.
Move door north. No reason to crowd pull side.
[/color]
hhallancia
 
Posts: 35
Joined: Tue Jan 12, 2016 9:41 am

Re: Ramp Vignette - 1st Attempt

Postby Coach » Tue Apr 17, 2018 4:23 am

hhallancia wrote:
Coach wrote:Egress narrows at base of stair.
i used 6" risers to meet code. I also successfully placed a 60" turning radius at the base of the stair. space between wall and protruding railing at bottom of stair = 52". are you suggesting I bend the railing 90 degrees at the base?

Space between rail and north wall can be no less than overall stair width.
Bending rail would work. Making stair 44" would be better.
User avatar
Coach
Site Admin
 
Posts: 13249
Joined: Wed May 23, 2012 2:08 am


Return to BDCS - BUILDING DESIGN & CONSTRUCTION SYSTEMS

Who is online

Users browsing this forum: No registered users and 30 guests

cron