3.1 Stair, Roof and Ramp

Ramp, Stair, & Roof Vignettes and Multiple Choice

3.1 Stair, Roof and Ramp

Postby siza » Fri Mar 23, 2018 9:26 pm

2nd try on NCARB's Vignette. I used cut stair this time. it feels odd on the upper level plan since all elements are seen from 2nd floor. Any comments will be greatly appreciated.

Thank you.
You do not have the required permissions to view the files attached to this post.
siza
 
Posts: 25
Joined: Wed Feb 12, 2014 9:23 pm

Re: 3.1 Stair, Roof and Ramp

Postby siza » Fri Mar 23, 2018 9:34 pm

Sorry for the typo in the title. This is 2nd try on the 4.0. Thank you!
siza
 
Posts: 25
Joined: Wed Feb 12, 2014 9:23 pm

Re: 3.1 Stair, Roof and Ramp

Postby Coach » Sat Mar 24, 2018 1:21 am

Stair
Can't tell id top landing is large enough without sketch elements.
Elevation error.

Ramp
Egress narrows at base of stair.

Roof
Lounge exhaust not in program.

User avatar
Coach
Site Admin
 
Posts: 13249
Joined: Wed May 23, 2012 2:08 am

Re: 3.1 Stair, Roof and Ramp

Postby siza » Sat Mar 24, 2018 7:10 pm

Coach wrote:Stair
Can't tell id top landing is large enough without sketch elements.
Elevation error.

Ramp
Egress narrows at base of stair.
******Would you explain a bit more specific? The base of stair has 5ft space


Roof
Lounge exhaust not in program.
******Thought lounge cooking will need an exhaust fan. Will this lose point? Thank you!

siza
 
Posts: 25
Joined: Wed Feb 12, 2014 9:23 pm

Re: 3.1 Stair, Roof and Ramp

Postby Coach » Sat Mar 24, 2018 8:52 pm

siza wrote:Ramp
Egress narrows at base of stair.

******Would you explain a bit more specific? The base of stair has 5ft space

Distance from end of west rail to north wall is less than overall stair width.

Roof
Lounge exhaust not in program.

******Thought lounge cooking will need an exhaust fan. Will this lose point? Thank you!

Don't add things that aren't called for in the program.
User avatar
Coach
Site Admin
 
Posts: 13249
Joined: Wed May 23, 2012 2:08 am


Return to BDCS - BUILDING DESIGN & CONSTRUCTION SYSTEMS

Who is online

Users browsing this forum: No registered users and 34 guests

cron