Page 1 of 1
Vignette 3.1 Alternates - Please Review
Posted:
Mon Feb 12, 2018 4:54 amby kek123
I used the same 4.0 program/code requirements with the 3.1 layouts. Please let me know if I have made any mistakes!
Thank you!
Ramp/Stair:
Ramp and Stair_V2.JPG
Stair Lvl 1:
Stair_Lvl 1_V2.JPG
Stair Lvl 2:
Stair_Lvl 2_V2.JPG
Roof:
Roof_V2.JPG
Re: Vignette 3.1 Alternates - Please Review
Posted:
Mon Feb 12, 2018 8:42 amby Coach
Ignore what code says about handrail projections required on one side and provide them on both sides to avoid errors.
Roof
Missing exhaust.
Missing skylight.
Place clerestory entirely withing programmed room.
Upper roof is too low.
Re: Vignette 3.1 Alternates - Please Review
Posted:
Mon Feb 12, 2018 2:39 pmby kek123
Hey Coach - sounds good on the handrails
Where am I missing exhaust? I have one in both toilet rooms. Is there another location on this vignette?
Where am I missing a skylight? There is a window in the toilet room on the perimeter and I think all the other rooms as well
Sounds good on the clerestory - I thought about that but kept it as is - should have fixed it!
How is the upper roof too low? I have 2' for the clerestory and 1'-6" for the roof construction.
Thanks for your help!
Re: Vignette 3.1 Alternates - Please Review
Posted:
Mon Feb 12, 2018 7:13 pmby Coach
You didn't use the 3.1 program.
Re: Vignette 3.1 Alternates - Please Review
Posted:
Tue Feb 13, 2018 11:13 amby kek123
Coach - I could not find the 3.1 program so I used the 4.0 program.
Re: Vignette 3.1 Alternates - Please Review
Posted:
Tue Feb 13, 2018 1:50 pmby Coach
Programs are in the pdf located same place you found the software.
Re: Vignette 3.1 Alternates - Please Review
Posted:
Tue Feb 13, 2018 4:54 pmby kek123
Yup. Totally missed that. I'm going to go through them now with that program. Thanks. Testing tomorrow!