All three vignettes from Sajjad. Any feedback is appreciated!
Stair
the overall width is 66" per program.
the distance between the last riser and the door is 5'-2", which is less than 66". is this acceptable? should i move the last run to the west by 36" to avoid overlapping with the open door?
Ramp
the elevations shown in the drawing should be negative number (couldn't do it in the software).
the landings of the ramp are 5'-8" depth to accommodate 60" turning radius and guardrail projection.
the overall width of stair is 8'-4". does it need an intermediate handrail?
Roof