Page 1 of 1

Stair - Attempt 2

PostPosted: Wed Nov 08, 2017 6:07 pm
by This.Is.Life
Stairs & landings are 56" wide (48" between rails).
I'm a little confused on "doors not to reduce width of landing to less than 1/2 the required width". Does this mean from the edge of the open door, the landing needs to be 56" divided by 2? So 28" from the open door to the edge of the landing?
Thanks for any help!

Re: Stair - Attempt 2

PostPosted: Tue Nov 14, 2017 8:27 am
by This.Is.Life
Coach,
Would you mind helping me out on the reduce width of landing question?

Re: Stair - Attempt 2

PostPosted: Tue Nov 14, 2017 4:58 pm
by Coach
Stair - Door & half width.jpg

Re: Stair - Attempt 2

PostPosted: Wed Nov 15, 2017 3:58 pm
by This.Is.Life
Thanks!

Re: Stair - Attempt 2

PostPosted: Tue Nov 28, 2017 9:11 am
by Archer40
Coach, I am still not very clear about this, why the distance is measured diagonally from the door swing to the landing corner for the upper landing, while the lower landing is measured from the door edge to the closest landing corner? Shouldn’t it always be measured from the worst point (least landing width left)? Thank you for any explanation!

Re: Stair - Attempt 2

PostPosted: Tue Nov 28, 2017 9:42 am
by Coach
Think path.

Re: Stair - Attempt 2

PostPosted: Tue Nov 28, 2017 10:03 am
by Archer40
Coach wrote:Think path.


Great answer:) Thanks Coach!