3.1 Vignettes - Attempt #2

[gibiwan]

I am testing in one week and would love some feedback on my second attempt of the 3.1 vignettes.

Thank you!

[nana_ny]

Roof:

are the slopes for upper and lower reversed? it's a bit blurry but I think i see 2:12 upper and 6:12 lower
"3. The roof over the vestibule and waiting area shall have a slope between 6:12 and 12:12. • The roof and structural assembly is a total of 18 inches thick.
4. The roof over the remainder of the building shall have a slope between 2:12 and 5:12. • The roof and structural assembly is a total of 18 inches thick."

also, easy for me to spot because I just made these same opsies:

clerestory too long:
"5. The waiting room is to have a continuous horizontal clerestory window 30 inches in height located in the existing east wall. "

vent is missing in break room

[Coach]

Roof
Incorrect slopes.
Missing exhaust.
Sheds not recommended.

Ramp looks good.

Stair
Stair is too narrow.
Top landing is too small.

[Coach]

clerestory too long:

Line length is not adjustable.

[gibiwan]

Coach,
What requirement am I missing for the size of the top landing?

[nana_ny]

clerestory too long:

Line length is not adjustable.

now I'm baffled! I thought that per program waiting room only is to receive clerestory. The vestibule is not. So that's what I was referring to.
We need to redraw clerestory line, rather than adjusting. Is this the message?

[Coach]

clerestory too long:

Line length is not adjustable.

now I'm baffled! I thought that per program waiting room only is to receive clerestory. The vestibule is not. So that's what I was referring to.
We need to redraw clerestory line, rather than adjusting. Is this the message?

Clerestory is a fixed length. It's too long above because the 4.0 software was used.

[Coach]

Coach,
What requirement am I missing for the size of the top landing?

AOR and CFA overlap.

[nana_ny]

Clerestory is a fixed length. It's too long above because the 4.0 software was used. [/quote]


AAAAhhh! Okay. Thank you Coach!