3.1 Roof Vignette

[22design]

Any comments appreciated! I know the clerestory is a bit longer than needed, but I wanted to add it since its in the program i followed.

roof 3.1.jpg

[Coach]

Upper roof is too low.
Clerestory in wrong location.
Missing pvent.
Missing exhaust.

[22design]

Thank you for the comments Coach, but maybe I used the wrong program/code? I had no written documents with the 3.1 drawing, so I used the 4.0 program.

-To calculate the upper roof I took the top of roof directly below @ 13'-2 + 24" for clerestory+ 18" for roof thickness=16'-8". What am I missing?

-Followed 4.0 program/code: said to place clerestory on west wall of main space

-Is more than one plumbing vent needed for 2 toilets/2sinks?

-I put one exhaust in each restroom, am I missing one?

[Coach]

Thank you for the comments Coach, but maybe I used the wrong program/code? I had no written documents with the 3.1 drawing, so I used the 4.0 program.

Programs here: viewtopic.php?f=6&t=32138

-Is more than one plumbing vent needed for 2 toilets/2sinks?

Break room sink.

[22design]

I'm assuming the text is the AUT file, but just comes through with a blank screen or error when I replace the original with the 3.1 copy. Thanks though.

[Coach]

The program is in graphics_31.pdf.