Sajjad Ramp - ALT (Coach: Need Feedback on Landings)

[ramizkhoda]

Here's my attempt at the Sajjad Ramp Alt. Coach, my landings are sized at 5'-8" wide with the assumption that the handrails can not encroach within the turning space. Is this correct or should I reduce the landings t0 5'-0" wide and let the handrails encroach? Please let me know if this solution looks goods or has any errors. Thanks!

[Coach]

Landings at 180-degree turns require clear turning circle.
Landing in front of new doors does not require a turning circle; however, a 60x60 space is required. Middle stair rail encroaches. Move stair south.

[ramizkhoda]

Landings at 180-degree turns require clear turning circle.
-So in general, make landings at 60" wide except when they are at 180 degree turns?

Landing in front of new doors does not require a turning circle; however, a 60x60 space is required. Middle stair rail encroaches. Move stair south.

-I'm a bit confused as to why 60" is required at the doors. Figure 2-Maneuvering Clearances at doors on the ARE 4.0 BDCS Guide shows only a 48" minimum clearance requirement on the push side of doors. 60"x60" is required on the pull side (swing out side). Can you please clarify what you mean?

[ramizkhoda]

PS: Here is the revised with the stair moved south within railings clearing the 60x60 space at the top landing and all landings 60" wide. Please let me know if this looks good now, Thanks!

[Coach]

I'm a bit confused as to why 60" is required at the doors. Figure 2-Maneuvering Clearances at doors on the ARE 4.0 BDCS Guide shows only a 48" minimum clearance requirement on the push side of doors. 60"x60" is required on the pull side (swing out side). Can you please clarify what you mean?

Ramp landing at change of direction must be 60x60 min.

[Coach]

PS: Here is the revised with the stair moved south within railings clearing the 60x60 space at the top landing and all landings 60" wide. Please let me know if this looks good now

CLEAR turning circles.

[ramizkhoda]

Is this what you mean with clear turning circles at the landings without handrails encroaching?

[Coach]

Yep.

[matt]

just to verify, this would require the width of the ramp to be 68" with each handrail encroaching 4" from each side and a 60" clear turning radius?

[nana_ny]

this is post-circa 2015, but ... I'd like to try this vignette and I do have the background loaded for this alt but no program. I see double door and figure that there must be a program text. Could someone point me to same? thanks!!!

[Coach]

viewtopic.php?f=6&t=13981