Site Grading

Site Grading & Site Design Vignettes and Multiple Choice

Site Grading

Postby dcrichard89 » Sat Nov 11, 2017 8:24 am

Hey guys,

I just wanted to get some feed back from you guys. I deleted all the sketch lines, but everything I saw measured out to within the slope tolerances. I just wanted to make sure the drainage looks right. I only have two main concerns; First i did not rotatod my building at all to be exactly perpendicular to slope, don't know if that is a big deal or not, second is on the higher side of the building I made the topography into a ridge before it enters the swales.

Please let me know if y'all see anything wrong,
Thanks,
Daniel R.
You do not have the required permissions to view the files attached to this post.
dcrichard89
 
Posts: 1
Joined: Sat Nov 11, 2017 7:53 am

Re: Site Grading

Postby dilettante119 » Sat Nov 11, 2017 6:52 pm

It seems FFE is set at 1' higher.
The contour line indicates it is at 108'-6"
Can't find anything other than that.
dilettante119
 
Posts: 15
Joined: Tue Oct 25, 2016 6:39 am

Re: Site Grading

Postby Sparky83 » Sun Nov 12, 2017 8:41 am

108 should trace the edge of the display.
Display is 1' too high.
Over graded. Provide only what is necessary.
Sparky83
 
Posts: 7649
Joined: Tue Dec 02, 2014 1:36 pm


Return to SPD - SITE PLANNING & DESIGN

Who is online

Users browsing this forum: No registered users and 41 guests

cron