Transitioning and the Rolling Clock

Site Grading & Site Design Vignettes and Multiple Choice

Transitioning and the Rolling Clock

Postby Coach » Thu May 11, 2017 4:52 pm

Remember that your rolling clock DOES NOT reset when you transition, so if you're looking to take fewer exams, you need to know the full picture of what you're getting into.

Scenario 1 - Transition with SPD, PPP and CDS
If you lose:
CDS, you will have to pass 5 more exams!
PPP, 5 more.
SPD, 3 more.

Scenario 2 - Transition with PPP and CDS
If you lose:
CDS, you will have to pass all six 5.0 exams!
PPP, 5 more.

Plan accordingly.
User avatar
Coach
Site Admin
 
Posts: 12277
Joined: Wed May 23, 2012 2:08 am

Re: Transitioning and the Rolling Clock

Postby Coach » Thu Jun 15, 2017 12:41 pm

"Your rolling clock transitions with you. This means your 4.0 divisions will keep their expiration dates in 5.0."

https://www.ncarb.org/pass-are/are4/transition
User avatar
Coach
Site Admin
 
Posts: 12277
Joined: Wed May 23, 2012 2:08 am

Re: Transitioning and the Rolling Clock

Postby techtonix » Thu Aug 03, 2017 11:34 am

As I understand their calculator:

if Structural Systems 4.0 is the ONLY and LAST test you have to pass...
The ARE 5.0 equivalent tests you would have to pass are:

1)Project Planning & Design
2)Project Development & Documentation

Use their calculator here: https://arecalc.ncarb.org/
User avatar
techtonix
 
Posts: 89
Joined: Wed Nov 13, 2013 3:39 pm

Re: Transitioning and the Rolling Clock

Postby 2435takeare » Wed Sep 27, 2017 9:12 am

Choices below what is the best strategy option?

Option 1: take 3+2 ARE 4.0 & 5.0 Method
Take: Construction Document and Services, Programming Planning & Practice, Site Planning & Design in version 4.0, then after June 30, 2018 take Project Planning & Design, Project Development & Documentation.

Option 2: take 2+3 ARE 4.0 & 5.0 Method
Take Construction Document and Services, Programming Planning & Practice in version 4.0, then after June 30, 2018 take the Programming Analysis, Project Planning & Design, Project Development & Documentation.
2435takeare
 
Posts: 1
Joined: Wed Sep 27, 2017 8:13 am

Re: Transitioning and the Rolling Clock

Postby Coach » Wed Sep 27, 2017 3:26 pm

2435takeare wrote:Choices below what is the best strategy option?

It depends on what you've taken and your rolling clock.

Option 1: take 3+2 ARE 4.0 & 5.0 Method
Take: Construction Document and Services, Programming Planning & Practice, Site Planning & Design in version 4.0, then after June 30, 2018 take Project Planning & Design, Project Development & Documentation.

Option 2: take 2+3 ARE 4.0 & 5.0 Method
Take Construction Document and Services, Programming Planning & Practice in version 4.0, then after June 30, 2018 take the Programming Analysis, Project Planning & Design, Project Development & Documentation.

You don't have to wait for June 30th. You can transition whenever you want to.
User avatar
Coach
Site Admin
 
Posts: 12277
Joined: Wed May 23, 2012 2:08 am

Re: Transitioning and the Rolling Clock

Postby melliemoe » Thu Nov 16, 2017 1:45 pm

Why is my life so complicated hahaha
I have only 3 exams left in 4.0 - Structural Systems, Building Systems and Site Planning.
I have been having some health issues since 2014 and also started my family so have not been able to be as focused on getting these exams out of the way.
My rolling clock takes effect June 3, 2018 and I will lose CPD and PPP and then schematic design in December 2018.
Why not just take the 5.0 Project planning and design exam and be done? It seems that exam gives credits in all the remaining 4.0 exams for me. So complicated. Should I just call NCARB? Anyone know if the transition works that way?
melliemoe
 
Posts: 154
Joined: Fri Sep 27, 2013 11:00 pm

Re: Transitioning and the Rolling Clock

Postby Coach » Fri Nov 17, 2017 3:51 pm

melliemoe wrote:Why is my life so complicated hahaha
I have only 3 exams left in 4.0 - Structural Systems, Building Systems and Site Planning.
I have been having some health issues since 2014 and also started my family so have not been able to be as focused on getting these exams out of the way.
My rolling clock takes effect June 3, 2018 and I will lose CPD and PPP and then schematic design in December 2018.
Why not just take the 5.0 Project planning and design exam and be done? It seems that exam gives credits in all the remaining 4.0 exams for me. So complicated. Should I just call NCARB? Anyone know if the transition works that way?

CPD? I'll assume you must mean CDS.

I don't know what you're looking at but you're way off base.

As it stands, if you transition now you would have to pass PA, PPD, and PDD before 6/3/18.
If you don't transition, you'll have to pass SS, BS, and SPD before 6/3/18.

If neither of those happen, you're looking at needing all of 5.0.

With that in mind, I would transition ASAP and get cracking.
User avatar
Coach
Site Admin
 
Posts: 12277
Joined: Wed May 23, 2012 2:08 am


Return to SPD - SITE PLANNING & DESIGN

Who is online

Users browsing this forum: mse, Yahoo [Bot] and 1 guest