Site Zoning Vignette Question

Site Zoning Vignette and Multiple Choice

Site Zoning Vignette Question

Postby aree2015 » Sun Jul 16, 2017 9:55 pm

Can the buildable area of the building be a little less than the secondary construction area. The snap feature does not allow me to match the building points and the site improvement points near the lake setback? Please help.
aree2015
 
Posts: 43
Joined: Wed Jul 29, 2015 1:36 pm

Re: Site Zoning Vignette Question

Postby sbyrktct » Mon Jul 17, 2017 8:22 am

Just get as close as you can at the waterline... the points will not match exactly.
User avatar
sbyrktct
 
Posts: 1802
Joined: Thu May 24, 2012 9:35 am
Location: http://arehelp.webs.com/

Re: Site Zoning Vignette Question

Postby aree2015 » Mon Jul 17, 2017 9:42 am

Sbyrktct - Thanks for your response. So the buildable area should be within the surface/ site improvement area, correct. Since I can't get it to match exactly, and I dint want to have the buildable area more than the site improvement area.
aree2015
 
Posts: 43
Joined: Wed Jul 29, 2015 1:36 pm

Re: Site Zoning Vignette Question

Postby sbyrktct » Mon Jul 17, 2017 12:14 pm

Along the waterline, it doesn't really matter. Don't move the buildable area points too far from the waterline just to keep it "smaller" than the surface area.
User avatar
sbyrktct
 
Posts: 1802
Joined: Thu May 24, 2012 9:35 am
Location: http://arehelp.webs.com/


Return to PPP - PROGRAMMING, PLANNING & PRACTICE

Who is online

Users browsing this forum: No registered users and 1 guest

cron