Vignette 3.1 Final Try before Test
Posted:
Fri Feb 02, 2018 1:30 pm
by Concord55
I am testing on Monday and would appreciate any feedback on the 3.1 Vignette.
Thanks!
Re: Vignette 3.1 Final Try before Test
Posted:
Sun Feb 04, 2018 6:53 pm
by jbellettiere
Bearing walls should extend down to top of footings at grade.
Re: Vignette 3.1 Final Try before Test
Posted:
Sun Feb 04, 2018 8:24 pm
by bladeyoon
jbellettiere wrote:Bearing walls should extend down to top of footings at grade.
Looks like this part will be accepted by NCARB.
Check below link for more info.
https://plus.google.com/102581411046827 ... kJa3PvqHVg
Re: Vignette 3.1 Final Try before Test
Posted:
Tue Feb 06, 2018 12:48 pm
by anonymous283
Here's mine. Doing the test thursday
Re: Vignette 3.1 Final Try before Test
Posted:
Tue Feb 06, 2018 12:50 pm
by anonymous283
you need 2'8" (or 60" total or 52" without fixures) between joist and ceiling on first floor, 2'8"(or 52" total or 44" without fixures) again on the second floor, and 1'8" (or 48" total or 40" without fixures) above the meeting room.