Vignette 4.0 (working on getting 3.1 to work)

Building Section Vignette and Multiple Choice

Vignette 4.0 (working on getting 3.1 to work)

Postby tyguli » Thu May 18, 2017 9:15 pm

Please review my first attempt. And if anyone has the program requirements for the 3.1 vignette, that would be helpful. I was successful in loading the 3.1 vignette section, but the .aut file doesnt work so I can't toggle between the windows to read the requirements.

1.Floor to floor height:
_First floor Lab ceiling height= 15'+ 8" clearance+20"deepest duct+32"joist
_Remaining First floor ceiling height= 8'4"+8" clearance+ 24" deepest duct+24"joist
_Second floor height=9'+8" clearance+20"deepest duct+24"joist
2. Foundation footing is right underneath grade line and extend to 5' below grade (where frost depth is)
3.Load bearing walls are directly on top of slab on grade, not foundation, which i think is wrong....
4. Interior non bearing wall at first floor sits on top of slab and extend to finish ceiling level
5. Fire-rated interior corridor walls at first and second floor sit on top of slab and extend to underneath the next floor's slab.
6. Parapets are 2' high



Thanks!
You do not have the required permissions to view the files attached to this post.
tyguli
 
Posts: 16
Joined: Tue Aug 04, 2015 7:39 pm

Re: Vignette 4.0 (working on getting 3.1 to work)

Postby greek22 » Fri May 19, 2017 7:26 pm

1. Duct size on first floor (to the left) looks too small to be the correct duct size. Confirm size.
2. Interior partition wall should be 6" above finished ceiling.
greek22
 
Posts: 312
Joined: Sat Nov 22, 2014 3:10 pm


Return to CDS - CONSTRUCTION DOCUMENTS & SERVICES

Who is online

Users browsing this forum: No registered users and 59 guests

cron