Page 1 of 1

3.1 Vignette 1st try - Testing Saturday

PostPosted: Mon Feb 20, 2017 6:27 pm
by arearcher
Any mistakes? I noticed in the other 3.1 vignettes posted all the meeting room spaces are much higher than 15'-0". What am I missing?

I can't view the text for the vignettes (virtualbox and windows shows a blank screen) so I'm using 8'-4" for the 1st floor clg height, 9'-0" for the 2nd floor, and 15'-0" for the double height space.

Re: 3.1 Vignette 1st try - Testing Saturday

PostPosted: Mon Feb 20, 2017 6:35 pm
by Coach
The actual program is in the graphics_31.pdf file available here: https://drive.google.com/file/d/0B9wLYP ... sp=sharing

Re: 3.1 Vignette 1st try - Testing Saturday

PostPosted: Mon Feb 20, 2017 6:36 pm
by arearcher
Thank you Coach!

Edit: Attached, revised 3.1 Vignette. Looks much more like the others I've seen now.

Re: 3.1 Vignette 1st try - Testing Saturday

PostPosted: Tue Feb 21, 2017 3:24 pm
by Coach
Break slab at bearing wall.
Based on sketch rectangles, it looks like you placed 2nd floor clg above light space.

Re: 3.1 Vignette 1st try - Testing Saturday

PostPosted: Mon Sep 11, 2017 11:07 am
by AREator
I don't get it. Nothing in this (3.1) jumps out as different than the regular 4.0 vignette

Re: 3.1 Vignette 1st try - Testing Saturday

PostPosted: Mon Sep 11, 2017 1:36 pm
by Coach
AREator wrote:I don't get it. Nothing in this (3.1) jumps out as different than the regular 4.0 vignette

There's more variation in joist-duct combos and the governing combo isn't necessarily at the cut line.

Re: 3.1 Vignette 1st try - Testing Saturday

PostPosted: Mon Sep 11, 2017 2:59 pm
by AREator
ah, yes. I've noticed that as I work on the vignette.
And you need to correctly analyze three zones (on Level Two) to correctly draw the two roofs/plenums.